Automotive Bearings Manufacturer

Hydropower Engineering Consulting Group in EPC-owned by the China Electric Power Construction Group Ethiopia Ada Ma windmill  power project the success of the first unit grid.

Essex Adama project is located in the Ao Luomu state Adama, 95 km from the capital Addis Ababa, the installed capacity of 34 units, with a total installed capacity of 51 MW. Wind power generator equipment supply and installation of projects implemented by the China Hydropower Engineering Consulting Group and to the Commonwealth of overseas companies, the contract amount of $ 117 million, the China Export-Import Bank of preferential buyer’s credit to support new energy projects.

It is understood that this is the first technology, standards, management, equipment as a whole to go out of the wind power project, the Chinese standards for design, construction and acceptance, the use of the fan equipment and supervision, strategic significance and practical significance.

16 Leadership Council of the Union of the East African home wind generator power system and the fifth Conference of Ministers of the eight-nation energy ministers and delegates of about 30 people made ​​a special trip to the wind power project under construction, site visits, have expressed admiration for the construction of wind power projects on the Essex and the Chinese government to help the African people to develop green environmentally friendly energy expressed the highest respect, marvel of the Chinese contractors building the speed and efficiency, praised the project to set an example for non-renewable energy cooperation.

Adama project units to the grid, the stage of critical nodes, marking the completion of the project and laid a good foundation for the full completion of the project. This is a project department and construction units of about 300 employees and 700 local employees result of joint efforts, is the crystallization of co-operation by the Ethiopian Electric Power Corporation, and supervision units  home wind turbines with Joint Venture Project Department devoted Hydropower Engineering Consulting International, Inc., Hydropower Engineering Consulting Group and in land overseas, the Chinese government and the Export-Import Bank of the leadership of a lot of effort has been the strong support of the government and the local people in Essex.

Last week, one Australian customer Mr Green came to Hummer wind turbines for investigation on wind industry.

Hummer gave him a warm welcome. With the accompany of our salesman, Mr Green visited our wind generators factory and felt satisfied with our wind generator after one sample was under trial use and in good operation. The mechanized operation with a certain scale and the excellent quality of products made Mr Green realize that we are a professional manufacturer on wind turbines generator .
This short visit made him remember Hummer, Mr Green said. We hope to cooperate with him in the short future and let more and more Australian know Hummer.

China’s second largest wind turbines manufacturer maker agreed to build the windmill generator farms with Turkish real estate developer Agaoglu Group.
The deal was signed during the visit of Turkish prime minister Tayyip Erdogan to Beijing this week.
The agreement could involve more than 10 projects, according to Li Lecheng, senior vice president at Sinovel, with the first to be completed by the end of this year.
Sinovel will supply its 1.5MW, 3MW and 3.6MW small wind turbines to the wind farms, Li tells Recharge.
It is not clear where the projects will be located. They are expected to be onshore.
Around 60% of the financing for the projects will be provided by China Development Bank, according to sources at Sinovel. No details on the size of the investment were available.
Turkey currently has 1.8GW of installed Horizontal windt turbines capacity and aims to increase this to 20GW by 2023, according to the Global Wind Energy Council.
One of Turkey’s leading real estate developers, Agaoglu is planning to invest $1bn in the wind energy sector, says president Ali Agaoglu.

Wind power is the use of human resources, how to make better use of the gift of nature to our energy has been studied by scientists. In addition to the traditional wind turbines manufacturers and water tankers, one of the air turbine can be considered the use of wind weapon. In order to make better use of the wind resource, Altaeros recently launched an air turbine (AWT), the machine can take advantage of the strong wind power generation in the high altitude.

Strong wind power generation in high-altitude air turbine

The air turbine design is a combination of traditional windmills generator and airship filled with helium shell can be floating in the air, high above the wind, a steady air turbine, etc.. Previously, AWT, in Maine in the United States an experiment it float to a height of 350 feet, and successful power generation, and finally landed successfully. Altaeros company plans to conduct more in-depth testing, they plan to AWT to 1000 feet altitude, where the wind over the ground five times, you can produce more energy.

AWT in the United States, Maine to do an experiment

Another advantage of the AWT is rarely need maintenance and setup, and very environmentally friendly and there is no noise, the future of this equipment can get the trial in a remote mountain village and military sites. Altaeros company now hopes to find a reliable partner, together with the china wind generator development of the commercial value of the AWT.

Worldwide commercial application of offshore wind power 6 MW wind turbines manufacturer is still in the initial stage. Data show that the Danish Vestas, the world’s first wind power equipment manufacturer, announced that for the German wind farm developer PNE 15 6 MW offshore wind turbine offshore wind farm in the North Sea, Germany; old German wind power giant Repower 2013 is expected to be completed 6 MW offshore wind turbines installed in the German North Sea wind farm.

By contrast, domestic manufacturers can do power unit is not a lot of technology is not mature enough, the stability of the performance to be improved, especially the 5 MW and 6 MW required inspection. Stand-alone capacity of offshore wind turbines are usually more than 3 MW, from the operational point of view of the offshore wind turbine in the first round of bidding for projects, domestic enterprises with Vestas, Siemens or distance.

In this regard, the wind power experts believe that, driven by offshore wind power project bidding, the major unit manufacturers and parts wind generator  manufacturers pay more attention to quality and technological upgrading, a new development opportunities for the development of wind power.

For several years to maintain rapid growth, the domestic wind power industry performance in 2011 signs of a pullback. Ping An Securities analyst the Douze Yun expects nearly one hundred of the national machine manufacturer, is expected in 2011 total production capacity will reach 29 GW, but the actual needs only 15 to 18 GW. In this environment, price competition will be inevitable. In the case of conventional 1.5 MW wind turbines falling profit, the results for the first half of the number of large wind power generators companies fell as much as almost half.

It is reported that the “12th Five-Year” period China will focus on supporting the 3 to 5 MW onshore and 5 to 10 MW offshore wind turbine R & D and manufacturing. To 2020, China’s wind power installed capacity was added speed will remain above 10 million kilowatts per year, growth in volume is still high, the newly installed fans more inclined to “large”.

In this regard, the industry said, in the face of fierce market competition, and take various measures to reduce production costs, with a focus on hair large-scale small wind turbine is to maintain and expand domestic market share.

The world’s first 5MW permanent magnet direct drive offshore wind turbines manufacturer installation is successful in Fuqing three Town East sable Coast next month for equipment commissioning is expected in May grid.

The construction of the project in Fujian Province, Fujian, Hunan Xiangtan Electric Manufacturing Group the XEMC Co., Ltd. and Fujian Investment Group Energy Investment Co., Ltd..

5-megawatt permanent magnet direct drive home wind turbine at sea lifting site

It is understood that the project from the project to research and development put into operation which lasted two and a half years time, the success of the prototype lifting marked the development of Chinese windmill  power equipment manufacturing industry into the forefront of the world. The successful installation of the XEMC 5MW wind turbine project to integrate the European offshore wind power project development experience, has overcome the direct drive wind turbines and features integrated technology, a proprietary single main bearing synchronous permanent magnet generator design technology the technical difficulties of offshore wind turbine cooling system corrosion and moisture design techniques, and Europe in the trial run of several fans compared to the same power level, with a simple and compact structure, reliable operation, unit power corresponds to the quality of the lightest, to facilitate maintenance.

Spain wind power development process has been the fan the lack of fault ride through capability resulting in wind farm off the network’s plagued Spain solution to the power grid, wind turbine manufacturers, and related technical services to find together to discuss countermeasures. They found that as long as the three parties to fulfill their duties, the problem is technically a good solution. In January 2008, Spain issued a compulsory fan with fault ride through capability standard, within 500 milliseconds, the fan can not off-grid voltage fluctuations should not exceed 5% within the wind farm for one hour of normal operation. Strict implementation of the grid and home wind generator farm technology upgrade program, Spain has successfully resolved the fault through the problem. Among them, 40% of the low voltage ride through the transformation of wind power market share of possession, by the abundance shaped the company The company’s products suitable for any type of fan, and now serve the Northeast EPRI project.

The 2011 data show that the Spanish home wind power generator installed capacity of 20612MW, accounting for 21.3% of the total power generating capacity, wind power electricity 16 percent, peaked at 53 percent, according to EU Spain’s renewable energy requirements, the 2020 Spanish wind power will reach 30 percent.

Alberto Carbajo, said: “Spain need to address the next problem is the mismatch of supply of electricity demand with wind power in time, which is very similar to the situation in China. Wind power multiple, often the electricity demand in the doldrums. Excess wind power or waste, or storage, or transferred to where it is needed. ”

It is understood that in recent years, Spain will add capacity 35000MW, this will exacerbate the problem.

China Ming Yang Wind Power Group Limited a leading wind turbine manufacturer in China opened its North American research and development center on Centennial Campus, NC State University research park and technology campus in Raleigh, North Carolina.

The new center will focus on state of the art research on offshore wind turbines to further enhance energy output and lower the cost of electricity. This research will be demonstrated in Ming Yang newly developed wind turbine generator. Dr Shu Ching Quek, President of Ming Yang Wind Power USA Inc will lead the center.

Governor Mr Bev Perdue said “We welcome Ming Yang Wind Power to North Carolina. As the first industrial large-scale wind turbine R&D facility in the state, we look forward to a successful partnership in harnessing North Carolina’s wind power potential.”

This announcement is in line with the recently released report from the Scientific Panel on Offshore Energy that recommended engaging wind-energy companies to promote opportunities for offshore wind  generators development and making North Carolina an east coast hub for the industry.

Mr Chuanwei Zhang Chairman and Chief Executive Officer of Ming Yang said “We are very excited to set up a new R&D Center on Centennial Campus in Raleigh to focus on cutting-edge technology research for our new wind turbines. The R&D center is Ming Yang’s first step into the United States.”

Ming Yang officials say they chose Centennial Campus as the location of its new R&D center in order to leverage the multi-disciplinary talent pool available in the area and to take advantage of the company close proximity to NC State College of Engineering also located on Centennial.

The company’s initial partnership with the university will flow through the School Department of Mechanical and Aerospace Engineering, and it will revolve around research in wind turbine aerodynamics, aero-acoustics and composite structures.

NC State also expects to work with the company on research in structural health monitoring, gear boxes and mechanical design.

Mr Terri Lomax, vice chancellor of research, innovation and economic development said “This is an important collaboration for us. Centennial Campus is quickly becoming a hub of activity associated with alternative energy technologies, smart grid research and distributed energy concerns. We’re looking forward to working with Ming Yang on a number of different projects.”

Much of the interest surrounding Centennial Campus and alternative energy technologies revolves around the FREEDM Systems Center, the only National Science Foundation-funded center dedicated to the successful integration of the traditional energy grid with other energy sources, such as wind and solar. The FREEDM Center is located on Centennial Campus.

China’s Ministry of Commerce (MOC) will negotiate with the US side over its probe into Chinese exports of wind towers through association channels, Vice Commerce Minister Jiang Zengwei said on Wednesday.
The US Commerce Department announced on January 19 that it was to launch anti-dumping and anti-subsidy investigations into wind towers from China wind turbines and Vietnam. It was another US probe into China’s clean energy exports after a similar one covering solar panels.
“Wind power products from China have a competitive edge in the international market, and the United States has taken some protectionism measures against these products,” Jiang said on the sidelines of the annual session of the National People’s Congress.
“We have taken notice of the sanctions,” the vice minister added.
“The act will not only hamper bilateral cooperation in the field of new energy and harm the interests of US industries, but also go against global efforts to tackle the challenges of climate change and energy security,” the MOC said in a statement in January in response to the probe.
The merchandise covered by the investigation is steel towers that support the engine and rotor blades for use in wind turbines with electrical wind power generation capacities in excess of 100 kW, according to the MOC.
The anti-dumping and anti-subsidy investigation came after the US Wind Tower Trade Coalition filed petitions in December 2011, accusing government-subsidized Chinese companies of dumping products in the US market.
Statistics showed that China exported more than $200 million worth of wind generator towers in 2008, but the figure dropped to about 100 million in 2010.

Innovation Forum held recently in Tianjin 2012 Tianjin windmill  power industry, said, according to preliminary statistics, the new wind power capacity in 2011 close to 18 million kilowatts, a total installed capacity of 65 million kilowatts, China is already the world’s upwind power equipment manufacturingbig country and wind power installed capacity of most countries, become a veritable wind TVU country.

He Dexin, said, In recent years, government support, technology introduction, digestion and absorption, joint design and independently developed a different model of development, China’s wind power industry has been the development of large-scale, with a large-scale  home wind power generator equipment manufacturing capacity, the initial establish a wind power machine, spare parts, including wind power R & D systems and industrial supporting system. The floor of the wind power development has been large-scale development, the construction of wind power in steady progress.

He said wind power development in China’s  wind turbines structure has a certain degree of wind power to increase energy supply, reducing greenhouse gas emissions, spur economic growth and increase employment has played an increasingly important role, so attracted the full attention of the international community.